You are here
CMC database
Field of measurement: pressure
Internal identifier | Range | Calibration and measurement capabilities | Conditions of measurement | Procedure | Note to procedure | |
---|---|---|---|---|---|---|
2 | (0.6 - 40) MPa | (8,3E-5.pe + 10 - 8,3E-5.pe + 10) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (40 - 100) MPa | (8,8E-5.pe + 10 - 8,8E-5.pe + 10) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (40 - 100) MPa | (8,8E-5.pe + 10 - 8,8E-5.pe + 10) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (100 - 120) MPa | (1,2E-4.pe + 10 - 1,2E-4.pe + 10) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (100 - 120) MPa | (1,2E-4.pe + 10 - 1,2E-4.pe + 10) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (20 - 600) kPa | (2E-5.pe + 48 - 49) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (20 - 600) kPa | (2E-5.pe + 48 - 49) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (0.6 - 40) MPa | (8,3E-5.pe - 8,3E-5.pe) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (0.6 - 40) MPa | (8,3E-5.pe - 8,3E-5.pe) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (40 - 100) MPa | (8,8E-5.pe - 8,8E-5.pe) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (40 - 100) MPa | (8,8E-5.pe - 8,8E-5.pe) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (100 - 120) MPa | (1,2E-4.pe - 1,2E-4.pe) Pa |
|
601-MP-C049, 133-MP-C010 | view | |
2 | (100 - 120) MPa | (1,2E-4.pe - 1,2E-4.pe) Pa |
|
601-MP-C049, 133-MP-C010 | view |
Field of measurement: volume
Field of measurement: flow
Field of measurement: length
Internal identifier | Range | Calibration and measurement capabilities | Procedure | Note to procedure | |
---|---|---|---|---|---|
1.1 | (0 - 10) mm | 0,9 µm | 151-MP-C003 | ČSN EN ISO 9513 | view |
1.1 | (10 - 50) mm | 1,3 µm | 151-MP-C003 | ČSN EN ISO 9513 | view |
1.1 | (50 - 1000) mm | 20 µm | 151-MP-C003 | ČSN EN ISO 9513 | view |
1.2 | (0 - 10) mm | 0,9 µm | 151-MP-C005 | ASTM E83 | view |
1.2 | (10 - 50) mm | 1,3 µm | 151-MP-C005 | ASTM E83 | view |
1.2 | (50 - 1000) mm | 20 µm | 151-MP-C005 | ASTM E83 | view |
1.3 | (0.3 - 1000) mm | 0,05+0,5×L µm | 633-MP-C003 | view | |
1.3 | (0.3 - 1000) mm | 0,1+1×L µm | 633-MP-C003 | view | |
1.3 | (0.3 - 1000) mm | 0,2+2×L µm | 633-MP-C003 | view | |
1.3 | (0.3 - 1000) mm | 0,5+5×L µm | 633-MP-C003 | view | |
1.6 | (0 - 500) mm | 0,8 + 5,0×L µm | 633-MP-C008 | view | |
1.7 | (0 - 1000) mm | 10,0 + 0,5×L µm | 633-MP-C009 | view | |
1.8 | (0 - 1) m | 0,3+0,4×L µm | 633-MP-C029 | view | |
1.9 | (0.005 - 150) mm | 1,0 + 4,0×L µm | 633-MP-C102 | view | |
1.11 | (0 - 600) mm | 1,2 + 2,5×L µm | 633-MP-C104 | view | |
1.14a | (0 - 100) m | Q(62+21,75L) µm | 815-MP-C510 | view |
Field of measurement: mechanical testing of materials
Internal identifier | Range | Calibration and measurement capabilities | Procedure | Note to procedure | |
---|---|---|---|---|---|
7 | (0.02 - 5.0E+6) N | (0.28 - 0.28) % MH | 151-MP-C001 | ČSN EN ISO 7500 | view |
7 | (0.02 - 5.0E+6) N | (0.3 - 0.3) % MH | 151-MP-C004 | ASTM E4 | view |
Internal identifier | Range | Calibration and measurement capabilities | Procedure | Note to procedure | |
---|---|---|---|---|---|
7 | (0.02 - 2.0E+6) N | (0.28 - 0.28) % MH | 151-MP-C001 | ČSN EN ISO 7500 | view |
7 | (0.02 - 2.0E+6) N | (0.3 - 0.3) % MH | 151-MP-C004 | ASTM E4 | view |
Internal identifier | Range | Calibration and measurement capabilities | Procedure | Note to procedure | |
---|---|---|---|---|---|
7 | (2.0E+5 - 2.0E+6) N | (0.34 - 0.34) % MH | 151-MP-C001 | ČSN EN ISO 7500 | view |
Internal identifier | Range | Calibration and measurement capabilities | Procedure | Note to procedure | |
---|---|---|---|---|---|
8 | (0 - 2500) J | (0,42 % + 0,1 J - 0,42 % + 0,1 J) J | 151-MP-C002 | ČSN EN ISO 148-2, ČSN EN ISO 13802, ASTM E23, BS 131-4 | view |
Internal identifier | Range | Calibration and measurement capabilities | Procedure | Note to procedure | |
---|---|---|---|---|---|
7 | (0 - 150) kN/s | (0.7 - 0.7) % | 151-MP-C006 | direct comparison with power and time standards, AED PANEL32 program | view |
7 | (0 - 150) kN/s | (1.5 - 1.5) % | 151-MP-C006 | direct comparison with power and time standards, AED PANEL32 program | view |
Field of measurement: force and torque
Field of measurement: mass
Internal identifier | Range | Calibration and measurement capabilities | Conditions of measurement | Procedure | Note to procedure | |
---|---|---|---|---|---|---|
2 | (0 - 20) kg | (5.0E-7 - 5.0E-7) MH |
|
612-MP-C132 | view | |
2 | (20 - 50) kg | (1.6E-6 - 1.6E-6) MH |
|
612-MP-C132 | view | |
2 | (50 - 600) kg | (5.0E-6 - 5.0E-6) MH |
|
612-MP-C132 | view | |
2 | (600 - 2.0E+5) kg | (1.6E-5 - 1.6E-5) MH |
|
612-MP-C132 | view |
Internal identifier | Range | Calibration and measurement capabilities | Procedure | Note to procedure | |
---|---|---|---|---|---|
1 | (1 - 20) mg | (0.001 - 0.001) mg | 612-MP-C131 | view |